Faith and Felt Obsession: animals

Showing posts with label animals. Show all posts

Thursday 26 March 2020

Psalm 28 - Shepherd Them Quiet Book Page

Psalm 28 was written by David and praises God who rescues him when he puts his trust in the LORD.

Memory Verse: “Save Your people,

And bless Your inheritance;

Shepherd them also,

And bear them up forever.” Psalm 28:9 NKJV.

Materials needed to create the Shepherd Them quiet book page:

A4 felt background sheet - I used tan
Betty Lukens Felt book 01 Bible Stories available at Koorong
sewing thread to best match the page
scissors!

Cut out all the pieces for this page and the page itself from the Betty Lukens set. The Betty Lukens FAQ section has posted a cutting tips PDF.

Sew the Betty Lukens page onto the background felt along three sides, leaving the top edge open to form a pocket. Pop the pieces inside the pocket (or better yet - play with them)!

Finished!

Difficulty Level = Easy, plus No Sew version.

A very easy quiet book page!
Just use hot glue wherever sewing is recommended for a no sew version.

Key Learning Areas and Skills

Psalm 28 - Praise God that He is willing and able to hear our prayers, save and shepherd us
Imaginative Play - make the lambs play and eat the grass, play the harp with David
Fine Motor Skills - all quiet books encourage fine motor skill development
Hand-eye Co-ordination - all quiet books encourage hand-eye co-ordination

Read the Chapter

Psalm 28

Devotional

We all know that we don't deserve to have the Master of the universe listen to our beck and call. And yet this Psalm is all about praising Him because He hears us.

The sole reason given in this Psalm that God answers our prayers is that we trust Him. He loves to come through for us because of that.

Psalm 28:1-2,6-9 Song

"To You, I Will Cry, O LORD"

(Esther Mui) Christian Praise Worship Lyrics

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

Have you asked God to be your shepherd - will you trust Him to lead you?

Thursday 12 March 2020

Easy Peasy Jellyfish Counting Quiet Book Page

It's been a while since I did an Easy Peasy page - but who doesn't like it when a quiet book page comes together quickly?

Don't get confused with an octopus quiet book page where there should only be eight tentacles - jellyfish can have lots! I must have a little obsessive compulsive disorder because it really grates on me when a counting page only goes up to eight. Admittedly I did make one that only goes up to eight, but in my defense that wasn't the primary purpose of the page - see Genesis 28 - Jacob's Ladder Quiet Book Page.

My jellyfish is a simple semi-circle. I used one of the rows from my Malachi 4 - Sun of Righteousness Quiet Book Page template and lined it up along a straight edge of felt and only cut around the outside edge.

Then I cut lengths from a 3mm white ribbon and threaded beads on (1-10). I made a card to stick the lengths of ribbon to so they would be evenly spaced when I went to sew them.

Then I pinned and sewed down the ends of the ribbons using zig zag stitch and angling in the two at either end so they would fit under the head of the jellyfish.

Finally, I sewed down the head of the jellyfish covering the ribbon ends and trimmed it with double gathered lace. This adds a touch and feel element to the page.

I am not sure I am a fan of the look with the looped tentacles... what do you all think? Although I don't think the ribbon would be thick enough when knotted to keep the beads on if they weren't.

Some variation ideas include:

Touch and feel tentacles made from various ribbons and trims - these can be curled using a hair iron or wet and let to dry around a pencil etc
Beads inside mesh tubing - If you look closely at this pinterest pin, Elena Rihsi has threaded the beads onto a thin cord before inserting them through the mesh cord. That way if the mesh breaks, the beads don't go anywhere! Genius.
Inserting a squeaker under the jellyfish head
Making a button/bead maze in the jellyfish head
Jellyfish swimming in reversible sequin fabric - comes with a beautiful free template from teenytinymom

Follow Faith and Felt Obsession on Facebook, Pinterest and You Tube

Have you made a jellyfish quiet book page? I'd love to hear about it in the comments!

Thursday 27 February 2020

Psalm 29 - Enthroned Above The Flood Quiet Book Page

Psalm 29 reassures us the God is both powerful and in control. He sits enthroned above the flood.

Memory Verse: “The Lord sits enthroned over the flood; the Lord is enthroned as King forever." Psalm 29:10 NIV

Materials needed to create the Enthroned Above The Flood quiet book page:

A4 felt background sheet - I used blue
a Noah's ark and animals image - I used this printable from the article Sharing Time: The Prophet Will Tell Us in the LDS kids magazine Friend
felt in white, green, red and as close as you can get to gold
Kam snaps
ric rak
30cm of 2mm round elastic
wooden cloud buttons - I bought these from AliExpress (not an affiliate link)
dotted mesh material
40mm wide rainbow ribbon - I bought this from AliExpress (not an affiliate link)
gold pleather
clear craft glue if using pleather to make sewing easier - I used polyacetic acid & ethylene resin based glue
decorative beads
a throne template - I modified this Colouring page Saint Nicholas' throne from edupics.com
hot glue gun and glue

Firstly, get the Noah's Ark and animals transferred onto white felt by the sublimation printing and heat press method - see my post on Sublimation Printing on Felt - Test. Cut out the ark and animals and sew the ark onto the background page along three sides leaving the top open to form a pocket for the animals.

Prepare two wooden cloud buttons by threading 15cm of the elastic onto each and tying a knot to create a loop of elastic. Slide the knot to the back of the button and hot glue in place. Cut the ends short.

Cut your mesh material to size to fit inside your page with extra length (and width if you want to finish the edges first - I didn't but I wish I had). Fold the top over itself a couple of times and pin and sew along the top edge as shown above, placing the elastic of the buttons underneath at either end. Make sure the end is poking out the bottom so you can pull it up and over the buttons to hold the rolled up mesh in place later.

Measure your ground and make a few layers of grass for the animals to sit in. I used ric rak to edge the top of the grass as there would be too many layers of felt along the bottom if I doubled the felt as I usually do. Use kam snaps to attach the grass to the page. At the back, use small squares of spare felt to strengthen them and prevent them ripping a hole when being pulled.

Cut a length of rainbow ribbon to fit your page and melt the edges - see my post on How to Stop Ribbons Fraying. I rounded the edges, but you don't have to. Mark where the button holes should be on the ribbon, then sew and cut.

Use the a colouring page as a throne template to make your throne. Simplify the lines by joining some together and rounding off the top.

Before sewing the pleather, I used the glue to attach the pleather to a sheet of felt. My pleather was stretchy which makes it very difficult to sew. Allow the glue to dry before sewing in place. Then sew the red felt on top and cut out the front section of the throne. Decorate with beads at the top.

Make a slot for threading the throne onto the rainbow ribbon by doubling a piece of felt and sewing onto the other half of your sheet of felt. Make sure it is slightly wider than your rainbow ribbon to allow it to pass through easily. Hot glue the throne to the sheet of felt with the slot facing out and centered at the back. Cut out the throne once again.

Thread the throne onto the ribbon and button it on, or store in the ark pocket.

Complete!